4.9~5.9GHz, 23dBi, Dual Polarity Antenna Kit; Flat Panel Antenna, Integrated Enclosure with Die Cast Adjustable Mounting Hardware by ARC Wireless

Electrical SpecificationsFrequency Range: 4.94—5.875 GHzGain (Typ): 24dBi Vertical, 23dBi Horizontal3dB Beamwidth Vertical/Horizontal: 8 degrees/8 degreesETSI: ETSI 2, 3, and 5VSWR 4.94-4.99GHz: ≤1.5:1 typ., ≤1.9:1 max 5.15-5.875GHz: ≤1.5:1 typ., ≤1.7:1 max.Port to Port Isolation: 40dB (minimum)Front-to-Back Ratio: >40 dBiCross Polarization: >30 dBiSidelobe Level: >12 dBiPower Rating: 30 wattsImpedance: 50 ohmsLightning Protection: DC ground Mechanical and Environmental SpecificationsLength x Width x Depth: 15.2in x 15.2in x 1.12in (38.6cm x 38.6cm x 2.8cm)Weight: 3.6lbs (1.66kg)Backplane: AluminumRadome: UV stabilized ABS plastic, grayWind Survivability: 125mph (201kph)Wind Load: 1.6ft² (0.148m²)Operating Temperature Range: -49°F to 149°F (-45°C to 65°C)Pole Mount Diameter Range: See ARC IES™ Enclosure SolutionsEnvironmental: IP 67 (with Enclosure)Connector (2): R/A SMA Jack Enclosure SpecsOuter Dimensions Length x Width x Depth: 8.6in x 8.6in x 3.17in (218mm x 218mm x 81mm)Inner Dimensions Length x Width x Depth: 7.47in x 7.47in x 2.5in (190mm x 190mm x 64mm)Exterior Coating: Powder coated, die cast aluminum, light gray, texturedWind Survivability: 125mph (201kph)Operating Temperature Range: -40 to 185 °F (-40 to +85 °C)Enclosure Part Number: ARC-IE2000K01 ARC ABS™, Articulating Bracket Solution SpecsLength x Width x Depth: 10.59in x 4.17in x 3.54 in (269mm x 106mm x 90 mm)Weight: 2.0lb (.91 kg)Material: Die-cast Aluminum with zinc plated steel boltsBracket Part Number: ARC-BR0701S01 (included when ordering Gen II)Pole Mount Diameter Range: 1.0in to 3.0in (25.4mm to 76.2mm)

Compatible Radios: MikroTik: RB 112, 133, 133c, 133c with SR9, 411, 500, 532ADI: PronghornGatworks: 2342, 2347, 2348PC Engines: Wrap 1C, 2BRTL: 8186Ubiquiti: LS2, LS5, RocketM5Zinwell: ZW2200, 2200 with Jumper, 21020If you have a specific radio not shown here, please contact ARC to see if it will fit with the Gen II Enclosure.