Home > Products > Home & Office Automation >

RMS-200 Advanced Remote Monitoring System by EtherTek Circuits

RMS-200 Remote Monitoring Board by EtherTek Circuits
Roll over for magnification


 
Additional Pictures and Information Below - Click to View


Manufacturers Web Page
Our Price: $529.95

AVAILABILITY: IN STOCK NOW may ship from other location
Product Code: RMS-200
Qty:

Description Extended Information
 
The RMS-200 is a unique remote monitoring, data acquisition and control device specifically designed for use with battery powered wireless internet repeater sites and other AC/DC powered remote equipment. Powered by DC voltage from 10 to 60 volts, the RMS-200 offers ultra low power consumption and uses the LINUX operating system for versatility, stability and security. It uses embedded Ethernet technology for internet data acquisition and remote voltage & temperature monitoring. On board relays provide a wide variety of normally off/on combinations for remote device control. The RMS-200 offers you the secure situational awareness you need to keep equipment operational and conditions monitored in a cost effective and compact design. Among its many features, USB and Serial ports offer additional peripheral functions.

For additional help: contact us at info@invictuswireless.com or 1-503-635-2562

Model: RMS-200 by EtherTek Circuits
Features
Six layer PCB with Nickel Immersion Gold plating and red solder mask. 400 - MHz Arm Processor (500 Mips !). 256 - megs of Nand Flash. Create and store custom applications. 64 - megs of SD-Ram. Dual Low Noise Switching Power Supplies, accepts 8-60 vdc input. Battery backed-up, real time clock. One onboard temperature sensor 25c +100c. Six 24 bit isolated voltmeters (+/- 100 VDC). Each voltmeter can be put into low voltage shunt mode (+/- 2 VDC). Two Power Relays for devices using 1 240v -5 amps AC/DC current. One Power Relay for devices using 1 240v -15 amps AC/DC current. Two programmable push buttons. Four general purpose I/O pins. Power output port, 5.0vdc (500ma). One full serial port for controlling cell phones, modems, etc. One console serial port. Two USB 2.0 ports for cameras, wireless clients, extra Ethernet, etc. Runs real Linux! 2.6.30 kernel. Command line utilities: ping, ftp, email, relays, etc. Flash new firmware over the internet. Hardware Watchdog Reset. Control RMS-200 via web page, telnet, ssh, or snmp. Full SNMP v3 support. Supports external USB relays and voltmeters. Hardware is user accessible from files on the board. Make your own utilities and scripts to upload. Pluggable connectors for ease of use.

Options and Accessories
10-pack ToughCable RJ45 Shielded Plug Connectors by Ubiquiti Networks for ToughCable
Our Price: $9.95

Add
Ubiquiti ToughCable RJ45 Plug / Connectors 10 pk
Tacky Tape - Waterproofing Tape 1/2
Sale Price: $9.95

Add
TACTAPE
20-pack ToughCable RJ45 Shielded Plug Connectors with Ground Wire by Ubiquiti Networks for ToughCable
Our Price: $24.95

Add
Ubiquiti ToughCable RJ45 Plug with Ground Wire - 20-pack
ToughCable Pro - CAT5e Ethernet Cable, Shielded with Ground Wire from Ubiquiti Networks
Our Price: $134.95

Add
Ubiquiti Networks ToughCable Pro CAT5e 1,000' Shielded Outdoor Ethernet cable by Ubiquiti Networks
7x6x2" NEMA6 Cast Aluminum Enclosure, 7 Knock outs, Mast/Wall Mount by Laird
Our Price: $39.95

Add
DCE762 - 7x6x2" NEMA6 Die Cast Enclosure by Laird
RJ45-FT Pass Thru Gland by Laird
Our Price: $1.69

Add
Gland
NEMA4x Polycarbonate Enclosure, 10x7x3"
Our Price: $24.95

Add
G378 10x7x3" NEMA4x Polycarbonate Enclosure


Browse for more products in the same category as this item:

Products > Home & Office Automation
By Mfr > EtherTek Circuits