Designed for extending the range of 2.4 GHz wireless radio devices, this amplifier is particularly effective when used with Direct Sequence Spread Spectrum (DSSS), Frequency Hopping Spread Spectrum (FHSS), and 802.11g Orthogonal Frequency Division Multiplexing (OFDM) radio modems. Includes Indoor 10-240vAC regulated power supply, indoor injector unit, outdoor ruggedized amplifier module and instructions. Please contact us for additional details and for assistance in creating a path loss profile using these amplifiers Model 12-217
250mW Model 12-217 802.11bg Outdoor Amplifier for OFDM Modulation Wifi Radios
Features:
802.11g 250mW Outdoor
Operating Range:
2400 - 2500 MHz
Operating Mode:
Bi-directional, TDD
Transmit Gain*:
Please see chart
Frequency Response:
± 1 dB
Output Power:
250 mW (+ 24 dBm)
TX Input Power:
0 dBm min
7 dBm max
Receiver Gain:
16 dB typical
Noise Figure:
3.5 dB typical
LED Inidicators:
RED
GREEN/ORANGE
Solid On: Power
and Receiving mode
Off: No Power
Blinking: Transmitting
Connectors:
N-type, female, 50 Ohm
Lightning Protection:
Quarter Wave Technology
DC Surge Protection:
Available
Power Consumption:
Tx = 1.2A, Rx = 130 mA @ 9VDC
Operating Temperature:
-40 °C to + 70 °C
AMP Dimensions:
4.25" L x 3.25" W x 1.75" H
Model 12-217, Trasmit Gain 17dB, Input Signal Typical 7dBm
|
